Sensitivity; Threshold; Retrigger - Alesis DM10 Setup Manual



Sensitivity



Threshold



ReTrigger

Sensitivity
By increasing the Sensitivity setting for a specific trigger, that trigger will respond to lighter hits
more forcefully.
To adjust this setting, follow these steps:
1. From the main screen, press the EXT TRIG button.
2. Use the CURSOR buttons to highlight the Input field.
Once the Input field is highlighted, use the VALUE/TEMPO dial to choose the trigger
you want to adjust.
(ie. If you would like to adjust the main head area of the snare drum, choose SnrHd. If
you want to adjust the snare drum rim area, choose SnrRim, etc.)
3. Use the CURSOR buttons to highlight the Sensitivty field.
4. Use the VALUE/TEMPO dial to increase or decrease the sensitivity of the affected
trigger.
5. Press the DRUM KIT button to return to the main screen.
Quick Link to this part of the video
Threshold
The Threshold setting is similar to Sensitivity in that if it is set to a low value, a very light hit
will trigger a sound. However, the difference is this: If the Threshold setting is increased, there
will be absolutely no sound until the pad is hit with a certain amount of force. This allows for
accidental unintentional hits to automatically be eliminated in real-time.
To adjust this setting, follow these steps:
1. From the main screen, press the EXT TRIG button.
2. Use the CURSOR buttons to highlight the Input field.
Once the Input field is highlighted, use the VALUE/TEMPO dial to choose the trigger
you want to adjust.