Table of Contents
Advertisement
Chapter 2
Installation
2.1 Connect your monitor to computer
1. Turn off your computer and unplug its power cable.
2. Connect the signal cable to the video port on the back of your
computer.
3. Connect the power cable for your monitor to the DC adapter and
connect the adapter the DC power jack on the back of your monitor.
You must use the supplied adapter.
4. Plug the computer and monitor power cables into a nearby outlet.
5. Turn your computer and monitor on , if your monitor display an image ,
you have successfully installed the monitor. If the monitor does not
display an image ,check all the connections.
Connecting the monitor to the computer and the power supply
2
Installation
Advertisement
Table of Contents
