Complementary Information - Sony DSC-W830 Service Manual

4-3-3. Complementary Information

(1) Installation Method of Battery Terminal Board
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Solder the battery terminal board on the SY-1035
Board.
∗ Battery terminal board is attached with
notch for installation.
Notch
Battery terminal
board
Battery terminal board
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Notch
DSC-W830
Solder Position
(reflow soldering )
SY-1035 Board
Notch
(2) Multi Connector (Rec) 8P Soldering Position
Solder Position
Solder Position
(3) Precaution During Speaker Installation
Route the speaker harness as shown below.
Rib
Speaker
Harness
(4) Precaution During Cabinet (Rear) Assy Installation
When assembling, adjust the switch and Knob position.
Switch
SW-1002 Board
4-6
SY-1035 Board
Multi Connector
(Rec) 8P
Knob
Cabinet (Rear) Assy