Lcd Assy (Lcd1) - Sony NWZ-S763 Service Manual

2-13. LCD ASSY (LCD1)

2 Peel off LCD assy (LCD1) from
the adhesive sheet (LCD).
1 Remove the LCD assy flexible board in the
direction of arrow A.
Note 1: There is a possibility of damaging LCD assy flexible board when
removing excluding the direction of arrow A .
OK
Note 2: Please match the position of two ditches and two ribs when you install
LCD assy flexible board.
If putting into the connector shift ditch and rib, connector will be broken.
A
NG
NG
two ribs two ditches
NWZ-S763/S763BT/S764/S764BT/S765
4 LCD assy (LCD1)
3 Pull out the LCD assy flexible board
from the ditch of the chassis (main).
Note 3: Please pull it out carefully so
– Front bottom view –
as not to damage.
15