Chapter 1 Installation; Unpacking; Pull Down The Base; Viewing Angle Adjustment - Acer AL1751 User Manual

Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be
performed by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of 5° ~ 40°C (or 41° ~ 104°F). Storing the LCD
Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
7. For use only with AC adapter, Li-shin LSE9901B1260 or LAE LAD6019AB5.

Chapter 1 Installation

1.1 Unpacking

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the
Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
▪ Main body x1
▪ Power supply x1
▪ 1.8M VGA cable x1
If you find that any of these items is missing or appears damaged, contact your dealer immediately.

1.2 Pull down the base

When you open the box to take the product out then pull down
the base first (See figure 1-1)

1.3 Viewing Angle Adjustment

The LCD Monitor is designed to allow users to have a
comfortable viewing angle. The viewing angle can be adjusted
from -5°to +25°.(See fig. 1-2)
When you want to close the base and body to 90°, you need to
release a button from 25°. (See fig. 1-3)
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting
this will result in damaging the Monitor and Monitor stand.
▪ 1.8M Audio cable x1
▪ User manual x1
2
Figure 1-1
Figure 1-2
Figure 1-3