Advertisement
Do not use induction heater without an
attachment fitted. Ensure locking screws
are firmly tightened.
Choose the correct size attachment for the
work piece. Ensure that there is an air gap
between the coil and the work piece,
5 mm is the recommended air gap.
WARNING AND DISCLAIMER OF USE
While Kamasa Tools has made every effort to ensure the accuracy of the in-
formation contained herein, such information is subject to change without
notice. Kamasa Tools provides no warranty with regard to this manual or
any information contained herein.
Kamasa Tools assumes no liability or responsibility to any person or entity
with respect to any loss or damages, direct or indirect, arising from use of
the information contained in this document.
6
Do not use damaged attachments with
the induction heater. Use of damaged
attachments can result in damage to the
induction heater and affect your warranty.
When using the rope coil, please ensure
that a minimum of 2 coils and a maximum
of 4 coils are created. Please ensure that
the coils are not too tightly wound around
the work piece.
Advertisement
