Advertisement
• Use of damaged attachments will invalidate the warranty.
Do not use the induction heater without an attachment fitted. Ensure
attachment is securely located and locking screws are firmly tightened.
Do not use the induction heater for longer than the stated duty cycle:
THREE minutes on followed by THREE minutes off.
• The main circuit board has an overheat protection device, however the
attachments do not have overheat protection so should not be used for
more than THREE minutes of continued use.
• Please ensure that the cooling fan is running when the power switch is
operated, if the fan does not run DO NOT use the induction heater.
Do not attempt to create more than 4 coils, a minimum of 2 coils and a
maximum 3 to 4 coils is the optimum number needed for best operation.
The induction heater should not be left unattended whilst switched on.
• In order to cool effectively, and prolong the life of your induction heat-
er, always make sure that the vents of the induction heater are clean
and free of dust and debris so that the power unit has an unimpeded
flow of cooling air.
• Do not attempt to repair or service the induction heater. There are no
serviceable parts besides replacing the coil attachments.
5
Advertisement
