Advertisement
TROUBLESHOOTING
The induction heater is designed to stop running if the internal
components become overheated, however, the attachments DO NOT
have an overheat shutoff. We recommend a 3 MINUTE duty cycle
with the induction heater. (3 minutes on – 3 minutes off).
If the unit stops suddenly: check to ensure unit is still plugged into a
functioning AC power outlet. Also be sure if using an extension cord
that there are no cuts in the cord. Allow the unit to cool off for at least
30 minutes and then retry.
If there is a lack of power output, this may be from using an improper
extension lead or a damaged attachment. Do not use more than one
extension cord at once.
SPARE COILS
K 12131
K 12132
K 12133
K 12134
K 12135
K 12130
www.kamasatools.com
Preformed 15 mm heating coil
Performed 19 mm heating coil
Preformed 22 mm heating coil
Preformed 26 mm heating coil
Rope coil
Advertisement
