Table Of Contents; Description; Safety; Purpose Of This Manual - Greenlee 639 Instruction Manual

Table of Contents

Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Hook Load ..................................................................4-7
Some Hook Loads Illustrated .................................... 5
Calculating the Hook Load .....................................6-7
Hoist Hook ..................................................................... 8
Hook Latch Kit ............................................................... 9
Illustrations and Parts Lists ....................................10-11
639, 650, 651, 652, and 653 .................................... 10
8012, 8018, and 8024 .............................................. 11
Greenlee Tools, Inc.

Description

Greenlee Hook Sheaves are used to change the
direction of a rope or cable while installing cable in
conduit or raceway.
They may also be used to change the direction of the
cable puller tailing rope to allow the operator to stand
away from the line of the high tension pulling rope
approaching the puller.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Tugger is a registered trademark of Tools, Inc.
KEEP THIS MANUAL
2
Hook Sheaves:
639, 650, 651, 652, and 653
8012, 8018, and 8024
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Hook Sheaves