Table of Contents
Advertisement
Quick Links
Turn on the display for operating interface
1.
1.
Power button/front light button. Press
display.
Interface starts with
into
operationinterface.Longpress
showing
thank you
"
2.
Press to switch between single mileage and total mileage.
3 . ODO is total mileage. TRIP is single mileage. Default is ODO.
4.
Mileage figure
5. Mileage unit Km/h or Mile/h.(MPH)
6. Power assist Levels. Switch throttle for levels change from 1
to 4.
7. Speed indicator.
simultaneously for set-up to switch between Km and Mile.
XH18-LCD Display Manual
"
.
"
Default unit is Km/h.
welcome
"
toturnoff.Screenshutoffafter
Press
to turn on the
and then gets
and
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ENERpower XH18-LCD
Summary of Contents for ENERpower XH18-LCD
- Page 1 XH18-LCD Display Manual Turn on the display for operating interface Power button/front light button. Press to turn on the display. Interface starts with welcome and then gets “ ” into operationinterface.Longpress toturnoff.Screenshutoffafter showing thank you “ ” Press to switch between single mileage and total mileage.
- Page 2 8. Speed indicator figure. 9. Power indicator. Green color for normal and red color for power shortage. 10. Erro indicator. Erro code for specific malfunction. Red color to turn 11. Front light indicator. Default is close. Press on/off front light. 12.Walk assisance (6km).
- Page 3 2. Press to back and return to operation interface. Press set up. 3. For example：After entering the set-up interface, default is to setupwheelsizes.Switchthrottletoincreaseorreducesizefigure. Press to set up Walk assistance function (6km/h). Switch throttle for on/off choices. Press to return operation interface.
Need help?
Do you have a question about the XH18-LCD and is the answer not in the manual?
Questions and answers