Table of Contents
Advertisement
SAFETY PRECAUTIONS
4
you purchased the product, or a service center.
- Installation of the product by an unauthorized person may result in
fire, electric shock, explosion, injury, or a malfunctioning of the
product.
• For electrical work, please have an electrician do the work based on
the installation manual and specified circuit diagram.
- Using an unsuitable cord, or having a non-professional work on the
electricals may result in fire or electrical shock.
• Do not place the product near a fire source.
- It may result in the product catching fire.
• If the product is installed in a hospital or a communication base
station, provide sufficient protective equipment against electrical
noise.
- The product may malfunction or other products may work
abnormally.
• Securely install the product.
- If the product is not secured during installation, it may fall or
malfunction.
• Read the manual thoroughly to correctly install the product.
- If not, an incorrect installation may cause fire or electric shock.
• When wiring the product, do not use a non-standard cable, nor
extend the cable excessively.
- It may cause a fire or electric shock.
• Securely install the power cord and communication cable.
- An unsecure installation may result in a fire or electric shock.
• Do not connect the power cord to the communication terminal.
- It may cause a fire, electric shock, or a product malfunction.
• Do not install the product in an area near combustible gas.
- It may result in fire, electric shock, explosion, injury, or a
malfunctioning of the product.
• Always ground the product.
- There is risk of fire or electric shock.
Use
• Do not place a heavy object on the power cord.
- It may cause a fire or electric shock.
• Do not change or extend the power cord arbitrarily.
- It may cause a fire or electric shock.
• Use the cord specific to the product.
Advertisement
Table of Contents
