Table of Contents
Advertisement
SETTING AND USING METHOD
20
• If entering the setting screen for the first time.
- After turning power on, press the 'MENU' button and the 'SELECT' button at the same
time and the screen will change to the screen where you can select the product
connection type. Select the product type to connect, and then press the 'SELECT' button.
Then, the selection of the product will be saved and the screen will be switched to the
main standby screen.
L G
<Main standby screen>
• If after selecting the connection product type at least once, you are entering the setting
screen.
- After turning power on, press the 'MENU' button and the 'SELECT' button at the same
time and then will be switched to the function setting screen.
• After selecting EHP product
E L E C T R I C
D I S T R I B U T O R
<Main standby screen>
• After selecting GHP product
P O W E R & G A S
D I S T R I B U T O R
<Main standby screen>
• The item with letters blinking is the current setting location on the function setting screen.
h If you want to change the connection type of product
- On the function setting screen, press the (▲) button and (▼) button simultaneously, and then
you can enter the connected product type setting screen.
CAUTION
!
• Power indicator setting only can be changed during the 20 minutes after turning on the
power. 20 minutes later, if you need to change settings, turn the power indicator on again.
P O W E R
P R O D U C T
T Y P E
1 . E H P
2 . G H P
C H A N G E
S E T T I N G
<Connection Product Type Setting Screen>
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : 1 W , I D U , 0 0 - 0 1
W H M 2 : 1 W , O D U , 0 0 - 0 1
<Function setting screen>
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : 1 W , O D U , 0 0 - 0 1
L H M 1 : 1 0 L , O D U , 0 0 - 0 1
<Function setting screen>
I N F O !
Advertisement
Table of Contents
