Icom IC-756PRO Alignment Procedure page 8

RX Receiver
- Set radio to follows
- Frequency:
- Mode:
- Shift:
- Filter
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Receive
- Adjust L111, L112 and L113 for maximum level
RX Total Gain
- Set radio to follows
- Frequency:
- P AMP:
- Mode:
- Shift:
- Filter
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Apply 14.1015MHz/54dBu signals to ANT connector
- Apply no signals to ANT connector
- Adjust R210 for 30dB between with signals and without signals
14.1015MHz
USB
0
2.4KHz
14.1015MHz
OFF
USB
0
2.4KHz