Advertisement
Step 4
Plug Varex wiring into rear muffler (2 pin plug with yellow rubber seal), run the wiring into the
trunk area and forward to the passengers side front of the car.
Connect 4 white 4 pin plug to the Smart Box, plug OBDII cable into Factory OBDII Port then to the
Smart Box, Attach GPS Aerial to Windshield and then to Smart Box and finally connect Varex Key
Fob Module to the Smart Box using the Short Grey Connecting Cable.
Download the Varex SmartBox App from the App Store or Google Play, Set up SmartBox settings
and check that Varex is working Correctly.
You can find a Detailed Video for the SmartBox Installation and setup on the Xforce Website
www.xforce.com.au/tv
Note: When you first start your vehicle after the installation of your new XFORCE Performance Exhaust System, there may be some smoke and fumes coming from the system. This is a protective oil based coating used in the
manufacturing of mandrel bent performance exhaust tubing. This is not a problem and will disappear within a very short period of time after the exhaust has reached normal operating temperatures.
Advertisement
