Download Print this page
Sencor SSI 0710VT Original Manual

Sencor SSI 0710VT Original Manual

Advertisement

Quick Links

SSI 0710VT
EN Steam station
Translation of the original manual
Copyright © 2019, Fast ČR, a.s.
- 1 -
11/2019

Advertisement

loading

Summary of Contents for Sencor SSI 0710VT

  • Page 1 SSI 0710VT EN Steam station Translation of the original manual Copyright © 2019, Fast ČR, a.s. - 1 - 11/2019...
  • Page 2: Steam Station

    Steam station Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. General warnings ■ This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers.
  • Page 3: Safety During Use

    ■ Prior to disconnecting the steam station from the power socket, always turn off the steam station using the appropriate button. ■ To avoid potential injury by electrical shock, do not clean the steam station or the iron under running water, do not spray it with water and do not submerge it in water or any other liquid.
  • Page 4 SSI 0710VT reset Copyright © 2019, Fast ČR, a.s. - 4 - 11/2019...
  • Page 5 Copyright © 2019, Fast ČR, a.s. - 5 - 11/2019...
  • Page 6: Description Of The Appliance And Accessories

    ■ The water tank A3 can also be filled up without sliding it out of the steam station A1. Steam station In such a case, tilt open the filling opening lock B2 and fill the water tank A3 with water up to the MAX mark using a suitable container. User's manual Note: The non-stop system enables water to be added to the water tank A3...
  • Page 7: Cleaning And Maintenance

    TECHNICAL SPECIFICATIONS LIMESCALE PROTECTION SYSTEM ■ This steam station is equipped with an Anti-Calc system, which limits the formation Rated voltage ..........................230 V  of limescale deposits inside the steam station and the iron. It is also equipped with Rated frequency........................50/60 Hz an automatic sensor, which informs you about the need to replace the limescale Rated power input ........................