Ferroli CONNECT Installation And Use Manual page 52

No. Parameter
1) Clock
2) Temperature
3) COUP code
4) DHW set point
5) Boiler information
6) Installer data
7) Exit
1) Clock
» Press the buttons
enter.
» Press the "set"
hour,
» Press the buttons
» Press "mode"
2) Temperature
» Press the buttons
to enter.
» Press the buttons
» comfort (
» Press the buttons
» Press "set"
3) Coupling code
» See par. 5.4 on page 40.
52
EN
Display
and
button to select the data to be changed with this sequence:
minutes,
and to change the value.
to go back.
and to select the temperature menu, and then "set"
and to select the temperatures to be changed:
) – economic (
and to change the value of the selected temperature.
or "mode"
cod. 3541S181 - Rev. 00 - 09/2020
description
Set hours, minutes, year (y), month (m), day (d).
Set the temperature of CFT1, CFT2, ECO, FRST
RF code (see par. 5.4 on page 40)
Set DHW temperature, function available only with
OpenTherm connection
Reading of some boiler parameters only with
OpenTherm connection
Installer parameters
Return to the home page
to select the clock menu, and then "set"
year, month,
) – frost protection (
to return to the previous menu.
day.
)
to