Table of Contents
Advertisement
RDR43x0 Series Intrinsically
Safe Professional Digital
Communications Systems
Two-Way Radios
Setting Emergency Service
Man Down
Man Down is an optional licensed feature. If the feature is not activated
in the radio, contact your RCA Communications Systems Dealer.
Note: Your radio must be programmed by your RCA Communications
Systems dealer according your requirements to allow you to efficiently
use the Man Down feature.
This feature enables Man Down function in the radio. Man Down
initiates an emergency alarm to be sent if the radio is in a position at a
predefined angle for a predefined period of time and there has been
no actions taken by the user during the predefined time. Man Down is
radio-wide feature.
1. Press
to access the menu.
2. Press
or
to navigate to Settings and press
3. Press
or
to navigate to Emergency and press
4. Press
or
to turn On or Off the Man Down.
Lone Worker
Lone Worker is an optional licensed feature. If the feature is not activated
in the radio, contact your RCA Communications Systems Dealer.
Note: Your radio must be programmed by your RCA Communications
Systems dealer according your requirements to allow you to efficiently
use the Lone Worker feature.
This feature enables Lone Worker function in the radio. Lone Worker
initiates an emergency alarm to be sent if there has been no actions
taken by the user for a predefined time. Lone Worker is radio-wide
feature.
1. Press
to access the menu.
2. Press
or
to navigate to Service and press
3. Press
or
to navigate to Emergency and press
4. Press
or
to turn On or Off the Lone Worker.
Encryption (This feature is supported in Digital mode only)
Encryption (also known as Privacy) allows for the transmissions on
selected digital channels to be encrypted. Encryption is a software-
based solution that is meant to prevent eavesdropping. The receiving
radio(s) must have the same Encryption Key (PRODIGITM Advanced
Software Encryption) or the same Key Value and Key ID (for ARC4
Encryption) as the transmitting radio in order to decode the encrypted
transmission. Channels may have their encryption enabled or disabled
using a programmable shortcut key (Encryption On/Off) or the Encryption
Menu (Display Radios Only). A radio must have the Encryption enabled
on the channel to transmit with encrypted transmission. A visual
indication appears on all display radios if the channel is privacy-enabled.
Note: This is a radio-wide feature.
1. Press
to access the menu.
2. Press
or
to navigate to Service and press
3. Press
or
to navigate to Encryption and press
4. Press
or
to turn On or Off the Encryption.
to select.
to select.
to select.
to select.
to select.
to select.
Copyright © 2020 RCA Communications Systems www.RCACommunicationsSystems.com
INSTRUCTION MANUAL
GPS Settings (This feature is supported in Digital mode only)
GPS is a location reporting feature, which allows the radio to obtain its
current location from satellites it is connected to. The coordinates then
can be sent to a designated Dispatch console for tracking purposes.
Note: At least one RCA compatible PC dispatch console, serving as
Target Contact, is needed to decode and display properly the radio
unit location coordinates. For more information contact your RCA
Communications Systems Dealer.
1. Press
to access the menu.
2. Press
or
to navigate to Service and press
3. Press
or
to navigate to GPS and press
4. Press
or
to turn On or Off the GPS.
Accessory Link
This feature allows you to connect a wireless audio accessory to your
radio.
Note: Use only RCA approved wireless audio accessories.
Voice Recording
This feature allows you to record each communication with other
radios. A microSDHC card UHS Speed Class U1 is required to store the
voice recording files and is not included with the radio. If the feature is
not activated in the radio, contact your RCA Communications Systems
Dealer.
1. Press
to access the menu.
2. Press
or
to navigate to Service and press
3. Press
or
to navigate to Voice Recording and press
select.
4. You will see 3 options below, use the
desired option and press
• ON / Off
• Recordings
• History
Accessing General Radio Information (RDR4350 / RDR4380)
Your radio contains information on the following:
•
Bandwidth
•
Radio ID Press
•
Alias
•
Serial Number
•
Firmware Version
•
Hardware Version
To access the information on your radio, you have below two options:
1. Using the Radio Option Menu
1.1. Press
key to access the Option menu
1.2. Press
or
to select Radio Info.
2. Using the Radio Menu
2.1. Press
to access the menu.
2.2. Press
or
to navigate to Settings.
2.3. Press
or
to navigate to Radio info and press
select.
to select.
to select.
to select.
or
to navigate to the
to select.
14
to
to
Advertisement
Table of Contents
