Advertisement
•
Attach the light unit using two screws through the two mounting holes on the top of
the light into the previously drilled holes.
•
Ensure the light unit is securely attached.
OPERATION
•
Press the function switch on the front panel to turn the light on ON.
•
When set to ON and the ambient light is low, when the sensor detects movement it
will illuminate.
•
When no further motion is detected, the light will extinguish after 18 seconds.
NOTE: please allow up to 12 hours charging time on
initial operation.
MAINTENANCE
•
Clean the unit only with a soft dry cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
SPECIFICATION
Power supply:
Solar Panel:
Time Delay:
Working time:
Material:
Light Source:
Output power high/low modes: 150 lumen
Ambient light:
Sensor distance:
Sensor angle:
Product weight:
Product size H x W x D:
IP rating
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
1×18650 Li-ion (1200mAh) 3.7V battery non-replaceable
Polycrystalline silicon, 0.5W (5.5V, 90mA)
18 sec (auto delay function)
2hrs continuous light (12hrs charging time)
ABS
24 x SMD2835 LEDs
<10LUX
0-5m
110°
200g
48x133×115mm
IP44
o
110
Made in China. PR2 9PP
Man Rev 1.0
Advertisement
