Advertisement
Quick Links
LED SOLAR MOTION SENSOR LIGHT
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, place the light unit in a sunny
location to allow the batteries to recharge fully.
INSTALLATION
•
It is recommended to install the light at about 2.5M or higher above ground.
•
Offer the light unit onto the surface to be mounted and mark the position of the two
mounting holes.
•
Drill two holes the wall where marked with regard to any concealed wiring or
pipework. Fit wall plugs if required.
PELL0018
Advertisement
Related Manuals for Pro-Elec PELL0018
Summary of Contents for Pro-Elec PELL0018
- Page 1 LED SOLAR MOTION SENSOR LIGHT PELL0018 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • If the light output becomes less bright or flashes, place the light unit in a sunny location to allow the batteries to recharge fully.
- Page 2 • Attach the light unit using two screws through the two mounting holes on the top of the light into the previously drilled holes. • Ensure the light unit is securely attached. OPERATION • Press the function switch on the front panel to turn the light on ON. •...