Honda Jazz 2021 Manual page 91

uuChild SafetyuSafety of Infants and Small Children
■
Installing a Lower Anchorage-Compatible Child Restraint
System
A lower anchorage-compatible child restraint system can be installed in either of the
two outer rear seats. A child restraint system is attached to the lower anchorages
with either the rigid or flexible type of connectors (see illustrations).
Marks
a
Rigid Type
a
Lower Anchorages
b
90
1. Locate the lower anchorages under the
marks.
2. Lower the head restraint to its lowest
position.
3. Place the child restraint system on the
vehicle seat then attach the child restraint
system to the lower anchorages according
to the instructions that came with the
child restraint system.
u When installing the child restraint
system, make sure that the lower
anchorages are not obstructed by the
seat belt or any other object.
1Installing a Lower Anchorage-Compatible Child Restraint System
WARNING
3
Never attach two child restraint systems to
the same anchor. In a collision, one anchor
may not be strong enough to hold two
child restraint system attachments and may
break, causing serious injury or death.
Some child restraint systems come with optional
guide-cups, which avoid possible damage to the seat
surface. Follow the manufacturer's instructions when
using the guide-cups, and attach them to the lower
anchorages as shown in the image.
Lower Anchorage
a
Guide-cup
b