REMOvING THE EXPOSED BAKE ELEMENT
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
inside the oven.
3. Remove the back cover
(see page 3-8 for the procedure)
4. Unplug 2 terminals at each point
2 Terminals
COMPONENT ACCESS
(For the Upper oven only)
3. To remove the upper bake element:
a) Remove the 2 screws from the rear bracket.
b) Pull the element forward
3-14
2 Screws