Pig Waste Compactor; Setup Instructions - Pig DRM655 Manual

1 Setup Instructions

1. Remove PIG Waste Compactor from pallet and place on floor.
2. Mount the compactor to the floor using the predrilled holes in the base. Up to ½" floor anchors can be used. Floor
anchoring not required for operation (anchors not included).
3. Remove the pipe plug from the air intake pipe located on the back of the unit, attached to the side of the Rear Pivot
(Part #19 on exploded view).
4. Screw a male air connect chuck into the
5. Attach air chuck and air line (both not included) to male air connect. Max of 120 psi
6. Ground unit to earth ground with provided grounding wire.
Note: An in-line air filter/lubricator/oiler (included) should be used with this unit.

PIG Waste Compactor

/ " pipe.
3
8
4