Receiving a Fax
1. Set the fax receiving mode. For details, see "Setting Fax/Data Rx
Mode" on page 20.
2. Run the fax software on the PC.
3. Send pictures from the PC to a remote fax machine, either a PC
fax machine or an analog fax machine.
4. The remote fax machine can send faxes to the PC in the same
way.
Sending Asynchronous Data
You need not to set your phone when sending asynchronous data.
Make sure that the USB cable between the PC and your phone is well
connected. Send the data from the PC with the HyperTerminal
software loaded.
Receiving Asynchronous Data
1. Set the data receiving mode. For details, see "Setting Fax/Data Rx
Mode" on page 20.
2. Run the HyperTerminal software on the PC.
3. Send pictures from the PC to the HyperTerminal at the other end.
21