Table of Contents
Advertisement
Lenovo Moto One Hyper
Level 2 – Service and Repair Manual
2.
Use the Plastic Tweezer to place the white
Coax Cable on the Sub Board as shown.
3.
Use the Plastic Tweezer to place the black
Coax Cable on the Main PCB as shown.
4.
Use the Plastic Tweezer to place the white
Coax Cable on the Main PCB as shown.
5.
Ensure the Coax Cable hoop is pressed into the
wire groove and cannot be lifted.
PAGE 114
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
