Using The Mp3 Link Connection (Line In); Connecting To The Mains Supply - Salora SBO680 Instruction Manual

Using the MP3 LINK Connection (Line In)

Plug one end of a 3.5mm audio input cable (included) into the Line in on the unit. Before
use, disconnect any cables connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/headphone output on an MP3 player or
other audio source.
Press the POWER button on side panel or POWER button directly on the remote control to
switch on the unit.
One touch the SOURCE button repeatedly or directly press LINE in button on remote control
to enter LINE in mode. The mode indicator will turn green.
Audio played through the connected device will now be heard through the speakers.

Connecting to the Mains Supply

Ensure that the power supply voltage is in the voltage of 100V~240V.
This unit is designed to use adapter.
Connecting the unit to any other power source may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make
sure the mains plug is fully inserted into the mains socket.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device
must remain readily operable.
Connect the Adapter to the unit and AC Socket.
Ensure all audio connections of the unit are connected before connecting to the mains
power socket. Unplug the power cord from the outlet when the unit is use for an
extended period of time.
3.5mm to 3.5mm
audio cable
- 9 -
Audio device