Product Installation; Wall Mounting - Salora SBO680 Instruction Manual

Product installation

Wall Mounting

Precautions :
◊ Installation must be carried out by qualified personnel only. Incorrect assembly can
result in severe personal injury and property damage.
If you are going to install this soundbar yourself, you must have studied installations, such
as electrical wiring and plumbing that may be buried inside the wall.
It is installer's responsibility to verify that the wall safely support the total load of the
Soundbar.
◊ Additional tools (not included) are required for the installation.
◊ Do not overtighten screws.
◊ Keep this user manual for future reference.
◊ Use an electric stud finder to check the wall type before drilling and mounting.
1. Drill 2 parallel holes (Ø3-8mm each according to wall type) in the wall. The distance
between 2 holes should be 500mm.
2. Firmly fix a dowel (included) into each hole in the wall if necessary.
Dowels
5 0 0 m
W A L
L
Solid wall(i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
- 6 -
m
Dowels
W A L
L