Using The Optical Connection - Salora SBO680 Instruction Manual

3. Insert a screw (included) into each dowel. Make sure to leave a 5mm gap between the
wall and the screw's head. Lift the Bar over the heads of the screws and slot into place.
5mm
25-30mm
Connections

Using the OPTICAL Connection

You will need: An audio source with an optical audio output and a digital optical audio cable
(not included)
Connect the Digital Optical Audio cable to the optical output on the audio source and to the
Optical Input on the speaker bar.
Press the POWER/SOURCE button on side panel or POWER button directly on the remote
control to switch on the unit.
Press the OPTICAL button on the remote control to switch to Optical mode or one touch
POWER/SOURCE button on main unit repeatedly to select the Optical mode. The mode
indicator LED will turn White.
Using the native controls on your connected device, make sure the audio settings are set to
PCM or Optical Audio and are turned on.
Audio from the connected audio source will now be played through the speakers.
Using the native controls on your connected device, make sure the audio settings are set to
PCM or optical audio and are turned on.
OPTICAL cable
- 7 -