Advertisement
Operating Your Dryer
WARNING
To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in this Use & Care Guide before operating your dryer.
WARNING
DO NOT operate dryer without lint filter in
place.
NOTE
The electric dryer has been designed and certified to operate at both 240V and 208V. Drying
times on a 208V power supply will be approximately 20% longer than drying times on a 240V
power supply. This is normal and expected behavior and applies to all drying cycles.
STEPS
1. Prepare
• Dry items of similar fabric, weight and construction
load for
in the same load.
drying.
• Separate dark items from light-colored items. Sepa-
rate items that shed lint from those that attract lint.
• Check for stains which may not have been re-
moved in washing. Repeat stain removal process
and wash again before drying. Dryer heat may per-
manently set some stains.
• Place delicate, rubber coated, or small items in a
mesh bag (not included).
• Be sure buckles, buttons and trim are heatproof
and won't damage the drum finish. Close zippers;
fasten hooks and loop fasteners. Tie strings and
sashes to prevent snagging and tangling.
2. Check that
the lint filter
is clean,
the water
container is
empty, and
both are in
place.
3. Load the
• Load items loosely. The average wet load will fill the
dryer and
drum 1/3 to 1/2 full. Items need room to tumble
close the
freely for even drying and less wrinkling.
door.
• When drying large items, dry only two or three
items at a time. Fill out the load with smaller items.
• For delicate or very small loads, add two or three
similar items to improve tumbling action.
Operating Instructions
WARNING
Clean the lint filter and empty the water
container after every load.
TIPS
1
1
IMPORTANT
DO NOT operate
dryer without lint filter
in place.
Extend the water
container nozzle all
the way out to ensure
all water has been
emptied from the
container.
Nozzle
DO NOT overload the
dryer. To save energy
and time, and to avoid
uneven drying and
wrinkling, avoid over-
loading the dryer.
7
Hide quick links:
Advertisement
