Creative Sound Blaster X3 Experience Manual page 5

CONFIGURING SOUND BLASTER X3 WITH YOUR
SUPER X-FI PROFILE
Transferring your personalized profile onto Sound Blaster X3 can be done effortlessly either through the Sound Blaster
Command app on your mobile device or Sound Blaster Command, available for Windows / Mac.
Follow the steps below to complete the setup guide to enjoy the magic of Headphone Holography.
FIRST-TIME USERS:
1. DOWNLOAD THE SOUND BLASTER COMMAND
APP & ACCESS THE DASHBOARD
Launch the app and tap on the side menu located on
the top left of the app. Tap on "Connect to Device" to
configure your device. Alternatively, you may also tap
on the blue bar at the bottom of the app to connect an
Audio Device.
3. DOWNLOAD YOUR SUPER X-FI PROFILE TO THE
SOUND BLASTER X3
1. Tap the button on screen to sign in to your Super
X-Fi account. You may also complete this step later
by tapping on the 'Skip' button.
2. A pop up will appear to prompt you to open the SXFI
App. Tap on 'OK' to sign in to your profile. The SXFI
App will then launch. Return to the Sound Blaster
Command app after signing in to your account.
3. Your Super X-Fi profile will automatically download
to the audio device. Upon completion, the pop up
will close. Tap on the 'Done' button to complete the
setup.
4. Your Super X-Fi profile has now been successfully
downloaded onto the Sound Blaster X3.
2. ADD AN AUDIO DEVICE BY PAIRING THE SOUND
BLASTER X3
Turn your mobile device's Bluetooth on and return to
the app. Sound Blaster X3 will appear under the list
of Audio Devices available. Tap on it to start pairing. A
pop up will appear to confirm Application Pairing. Tap
on "OK" to complete this step.
4. ENHANCING SUPER X-FI EXPERIENCE ON THE
SOUND BLASTER COMMAND APP
You may now remotely control the Sound Blaster X3 via
your mobile device and further configure Super X-Fi by
using the toggle buttons, update Super X-Fi profiles, or
adjust the Equalizer settings on the dashboard to suit
your audio needs.