Congratulations! Your Creative Xmod™ Wireless harnesses Creative's X-Fi™ technology to give you audio beyond CD quality. No software is required, so connect Xmod Wireless to your computer and stereo speakers, and start enjoying music with the X-Fi difference. Read on to learn how to get started with your Xmod Wireless! Contents About Your Xmod Wireless ...
About Your Xmod Wireless About Your Xmod Wireless 2 Play/Pause button Previous/Rewind button Next/Fast-forward button Volume LED ring Volume Control See “Using Your Xmod Wireless” on page 6. Power/Standby LED Headphone jack Audio Line In jacks Audio Line Out jack...
Media Player Shuffle button* 10 Media Player Repeat button* 11 X-Fi Crystalizer™ on/off buttons ® 12 X-Fi CMSS -3D on/off buttons NOTES *With some media players, some functions are not accessible via the Xmod Wireless remote control. About Your Remote Control 3...
Powered stereo or 2.1 speakers Turning on Xmod Wireless When Xmod Wireless turns on, your wireless connection is being prepared, so that when it is needed, the best connection can be made without any interference. During this time, the Power/Standby LED will flash red and finally light up blue.
Page 6
Step 2: Configuring Your Computer Make sure your Xmod Wireless is connected to your computer and all existing applications are closed. ® For Microsoft Windows Vista™ Click Start Control Panel Hardware and Sound Sound. The Sound dialog box appears. Click the Playback tab page.
Playing Music From Your Computer Launch your favorite media player and start playing music to enjoy the X-Fi difference. Using Your Xmod Wireless Inserting batteries into your remote control IMPORTANT The cover on the remote control can only be opened halfway. Do not try to detach the cover when inserting batteries.
Page 8
Subsequently, the entire Volume LED ring remains lit. NOTES You can also use the Volume Control on your Xmod Wireless or the volume setting on your computer’s media player. Muting audio When you mute audio, the Power/Standby LED flashes red.
Page 9
Xmod Wireless from your computer. NOTES You can also press down and hold the Play/Pause button your Xmod Wireless for 3 seconds to enable Standby mode. To turn on Xmod Wireless, press the Play/Pause button. Returning to factory default settings Press and hold the Previous/Rewind and Next/Fast-forward buttons on your Xmod Wireless together for three seconds.
By default, X-Fi Crystalizer and X-Fi CMSS-3D enhancements are enabled. X-Fi CMSS-3D is dependant on your speaker or headphone setup. X-Fi CMSS-3D Virtual - Enjoy immersive surround sound when your Xmod Wireless is connected to your Hi-Fi system or any powered stereo speaker system.
Connecting Headphones NOTES Speaker output is automatically disabled when headphones are connected to your Xmod Wireless. Disconnect the headphones to enable audio output through your speakers. Connecting Headphones 10 Headphone jack Headphones...
Connecting To An External Stereo Audio Device External audio devices that you can connect to Xmod Wireless include MP3 players, CD players, and any other stereo audio device with a Line-Out jack. Powered stereo or 2.1 speakers 2a Power adapter...
Support. Can I connect my Xmod Wireless to a USB hub? A USB hub may cause your Xmod Wireless not to be recognised by your computer. Always connect Xmod Wireless directly to your computer’s rear USB port.
Page 14
Why can’t I access my media player’s functions with the remote control? With some media players, some functions are not accessible via the Xmod Wireless remote control. Why can’t I hear any sound from my headphones or speakers? Check that: •...
Page 15
What happens when I reset Xmod Wireless? During a reset, your Xmod Wireless reverts to the original volume settings, and turns on the X-Fi enhancements. If your Xmod Wireless is paired with any X-Fi Receiver, the zone control settings are also erased.
Page 16
(see “Turning on Xmod Wireless or enabling Standby mode” on page 8). Why can’t I turn on Xmod Wireless when it is connected to my computer? Check that your computer is turned on. Xmod Wireless is powered by your computer through the USB port.
General Specifications Connectivity • Headphone Out - 3.5 mm (1/8’’) Stereo jack • RCA Audio Line In jacks • Audio Line Out - 3.5 mm (1/8’’) Stereo jack • USB Mini-B port X-Fi Technology • X-Fi Crystalizer • X-Fi CMSS-3D Virtual •...
Safety Information Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product.
(1) Le matériel ne peut étre source D'interférences et (2) Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un fonctionnement indésirable. Compliance Manager Creative Labs, Inc. January 24, 2007 Creative Labs, Inc. 1901 McCarthy Boulevard Milpitas, CA. 95035...
Page 20
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd.
Need help?
Do you have a question about the Xmod Wireless and is the answer not in the manual?
Questions and answers