Minimum System Requirements - Creative Sound Blaster X3 Experience Manual

SOUND BLASTER X3 TECHNICAL SPECIFICATIONS
Model
GENERAL
Audio Processor
Connectivity
SNR for Playback
Maximum Playback Quality
Headphones Supported
Key Features
SOFTWARE
Downloadable Software
Audio Enhancement

MINIMUM SYSTEM REQUIREMENTS

Windows® OS
• Intel® Core™ i3 or AMD® equivalent
processor
• Intel, AMD, or 100% compatible
motherboard
• Microsoft® Windows 10 32 / 64-bit,
Windows 8.1 / 8.0 32 / 64-bit, Windows 7
32 / 64-bit
• 1 GB RAM
• > 600 MB of free hard disk space
• USB 2.0 / USB 3.0 port
Mac® OS
• Mac OS X® 10.9 or higher
• 1 GB RAM
• USB 2.0 / USB 3.0 port
© 2019 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Sound Blaster, X-FI, the X-Fi logo, Super X-Fi, SXFI, and the Super X-Fi
logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. Manufactured under license from
Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. All other trademarks are the property of their
respective owners and are hereby recognized as such. All specifications are subject to change without prior notice. Actual product may differ slightly from
images shown. Use of this product is subject to a limited warranty. Before using the software, you must agree to be bound by the terms and conditions
of the end user license agreement.
1 x USB Type-C port for PC / Mac
Super X-Fi Technology, 115 dB DNR / SNR, 32-bit / 192 kHz Hi-res DAC, 7.1 Discrete Channel
Output, Dolby Digital Live Encoding, Sound Blaster Acoustic Engine, Audio Balance
Sound Blaster Command (For Windows®)
Sound Blaster Acoustic Engine, Scout Mode, CrystalVoice, Virtual 7.1 Surround
PS4
• Firmware Version 5.0 or later
• Available USB port
• Available Optical Out port (for Dolby
Digital decoding)
Nintendo Switch
• Switch OS 5.0 or later
• Available 3.5 mm headphone port
• Available USB port (in docking mode)
• External USB Power (not included)
• Voice communications is title dependent
Find out more: www.creative.com/SBX3
Sound Blaster X3
Super X-Fi UltraDSP
1 x ⅛" Front-out Jack
1 x ⅛" Rear-out Jack
1 x ⅛" Center / Subwoofer-out
1 x ⅛" Side-out Jack
1 x TOSLINK Optical-out
1 x ⅛" Headphone Jack
1 x ⅛" Ext. Mic-in Jack
1 x ⅛" Line-in Jack
115 dB
32-bit / 192 kHz
32 – 600Ω
Android^
• Android OS Version 7.0 or later
• Device must have built-in Bluetooth Low
Energy (BLE) support
iOS^
• iOS Version 11.0 or later
• Device must have built-in Bluetooth Low
Energy (BLE) support
^ Used as a remote control for Sound
Blaster X3 when connected to a PS4 /
Nintendo Switch only. Does not support
audio streaming via Bluetooth