Using The Device; Storing The Device; Cleaning And Maintenance - Dometic SabreLinkFlex Installation And Operating Manual

SabreLinkFlex
7

Using the device

7.1 Before first use
1. Remove the plastic tab from the remote control's battery.
2. Pair the remote control to the remote receiver (fig. 0, page 5).
7.2 Switching on and off
➤ Proceed as shown (fig. 9, page 4).
7.3 Dimming the light
➤ To dim the light continuously ,proceed as shown (fig. a, page 5).
➤ To dim the light in percentage steps, proceed as shown (fig. b, page 5).
7.4 Changing the battery of the remote control
!
WARNING!
Keep batteries away from children.
➤ Replace the battery with a battery of the same type (3 V CR2025, see fig. 4,
page 3).
8

Storing the device

➤ Store the device in a clean, dry and dust-free space.
9

Cleaning and maintenance

!
WARNING! Electrocution hazard
Unplug the device from the power supply before cleaning and
maintenance.
EN
Using the device
11