Table of Contents
Advertisement
USER GUIDE
LCD PROJECTOR
8
MENU SYSTEM
The menu system was developed to gain access to functions not often
used, as opposed to frequently used features that are directly available
through the RC.
Press the MENU key on the RC to invoke the menu system. When the
menu is active, the cursor keys are used to navigate between options (and
can therefore not be used for mouse control etc. at the same time). The
LEFT key is used to activate an option.
The PROG key may be assigned to any of the menu options.
Toggle functions (like OSD ON/OFF) are tagged when active and untagged
when not active.
Increase/decrease functions (like TUNE and FREQUENCY) are adjusted
using the cursor keys. OSD is used to indicate the actual setting.
The MENU key is toggling the menu on and off. The menu is also switched
off after one minute of no action. The last position in the menu is
maintained during a session, but it is reset during power off. Most
selections are memorized, unless otherwise noted.
The main menu selections SETUP, SOUND and PICTURE are explained
in detail below.
Features only available with some sources are shown in light italic
characters in the menu illustrations, while generally available functions are
shown in bold characters.
24
Advertisement
Table of Contents
