Table of Contents
Advertisement
USER GUIDE
5.2
MOUSE
See the rear foldout when setting up.
Connect the mouse to the LCD projector using the appropriate adapter (5)
as described in the table below. Then connect the adapter (5) to the mouse
cable (1) at the computer end. Finally, connect the mouse cable (1) to the
LCD projector.
For the computer to recognise the mouse, connect the mouse before
power is applied.
A Y-split is provided with the PC and MAC adapters that enables parallel
use of the local computer mouse and the remote mouse. The local and
remote mice should however not be operated simultaneously, as this may
lead to unpredictable positioning of the mouse pointer.
If you have a Macintosh, make sure to connect your Mac mouse adapter
via the keyboard.
The optional PS/2 adapter does not have a Y-split.
APPLICABLE ADAPTERS:
MOUSE
Microsoft 2 key compatible (9 pin serial port)
PS/2 compatible mouse
Macintosh ADB-bus mouse
*)
Please note that some computers using the Microsoft 2 key mouse may not allow the Y-split
mouse adapter to work. A special straight PC adapter is available for this purpose.
ADAPTER
PC *)
PS/2
MAC
10
LCD PROJECTOR
Advertisement
Table of Contents
