Advertisement
Do not expose charger or batteries to wet or corrosive environments, extreme temperatures
(below 0C or above 50C), flammable or volatile materials, or impact or any other damage.
Do not connect or attempt to charge/discharge non-rechargeable or damaged batteries.
Do not
modify the charger, charger accessories, connectors, or batteries.
NOTICE OF RISK.
injury, property damage, and other dangers. Dangers peculiar to such activities include, but are
not limited to: fire, explosion, overheating, and electrical sparking & arcing.
this product, you assume these risks.
DISCLAIMER OF LIABILITY:
punitive, incidental, special consequential damages, to property or life, whatsoever arising out of
or connected with the use or misuse of our products. Your purchase or use of this product
constitutes your agreement to hereafter assume full and total responsibility for your subsequent
utilization of the Tenergy TB6B and you agree to defend, protect, save harmless, and indemnify
Parallax Inc., its officers, and employees relative to your potential use and misuse of this product.
LiPo Battery Charging Instructions
Examples reference Parallax's Gens Ace 3S LiPo batteries: 5300 mAh #752-00017, and 3300 mAh (#752-
00010). Your battery may differ.
1. Determine the maximum charge rate for your LiPo battery by multiplying the charge rate
multiplier by the capacity of your battery.
1C × 5300 mAh ×
The maximum charge rate is 5.3 amps for our example 5300 mAh battery, and 3.3 amps for our
example 3300 mAh battery. Remember that these are
at a lower current, as is necessary if the max charge current of your charger is less than that of
your battery.
2. With that information, you can now plug in
your charger to a 120 V outlet with the
included power supply.
3. After inspecting your battery for damage and
making sure it is cool to the touch, connect it
to the charge and balance leads of the
charger.
Copyright © Parallax Inc.
The Tenergy TB6B Balance Charger can at times involve substantial risk of
In no event shall Parallax Inc. be liable for any direct, indirect,
= 5.3 A
1 Ah
1000 mAh
Tenergy TB6B (#752-00009)
Do not use the discharge rate multiplier!
1C × 3300 mAh ×
maximum
By keeping & using
= 3.3 A
1 Ah
1000 mAh
ratings; they may be charged
v1.0 2/11/2016 Page 2 of 3
Advertisement
