Audio And Video - Ask Proxima Impact 24 User Manual

USER GUIDE
5.3

AUDIO AND VIDEO

Connect the LCD panel to a video source as shown in the rear foldout.
Use a TV set as a local video monitor if desired (the data monitor may not
be used as a video monitor).
Connect the AV cable (3) to the AUDIO and VIDEO connectors on the LCD
panel. Then connect the AV cable to the audio out connectors and video
out connector on the video source.
S-VIDEO, often referred to as S-VHS, may be connected using an optional
S-VIDEO cable.
Connect external speakers (1) as shown. The internal speaker is switched
off when external speakers are connected.
For added boost, an external amplifier may be connected to the speaker
output (1).
Connect the microphone (2) to the panel as shown.
APPLICABLE CABLES:
SOURCE
S-VIDEO
VIDEO
AUDIO
MICROPHONE
SPEAKER
TO SET UP FROM THE REMOTE CONTROL:
STEP OPERATION
1 Press S-VIDEO or VIDEO depending on input used
2 If necessary, press MENU, then POSITION correctly
3 If necessary, in the MENU under PICTURE, adjust COLOR
saturation and TINT.
5 Select audio source in the SOUND menu. Close the menu.
4 Adjust CONTRAST, BRIGHTNESS and VOLUME
CABLE
S-VIDEO (4 pin mini DIN connector)
AV cable (RCA jacks)
AV cable (RCA jacks and 3.5 mm jack)
Microphone cable (3.5 mm jack)
Speaker cable (3.5 mm jack)
10
LCD PANEL