Advertisement
Using the Mop
1.Fix the mop according to the
method showed on the diagram.
Use method of mop nozzle
when the mop is not attached
To protect the attaching location
of mop, it is recommend connect
the mop nozzle according to the
left diagram when mop is not
used.
Please clean the mop and mop nozzle as the following diagram.
Using the Mop and Mop Nozzle
Connecting
method
2.
After the mop nozzle matches
with the mop board, connect the
mop nozzle from the top down.
When you hear a sound of Ta Ta,
it means the connection is ok.
Disconnecting
3.Disconnect the mop board according
to method showed below, and then
take down the mop.
Mop nozzle
Mop board
Mop
When the mop is not used, you
couldn't use the method showed
on the left diagram. If not, the
mop nozzle will damage the
attaching location of mop.
method
23
Advertisement
