Page 1
Model VC68** Language English Page Color(cover/body) Material Size(W*H) Weight 100g 150×220(mm) Date Designer 2009.04.27 zhangdongyue MFL62069202 Part No. Description Owners Manual Chage Record Change content Designer Confirm Date ECO No.
Page 2
OWNER’S MANUAL VC6818NR VC6820UR VC6820QR New Type Cyclone Vacuum Cleaner This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4. 5 for your safety. Please keep this manual in an easily accessible place and refer to it anytime.
Table of contents Important safety instructions ....................... 4 ~ 5 How to use ............................. 6 Assembling vacuum cleaner .......................... 6 Operating vacuum cleaner ..........................8 Using carpet and floor nozzle......................... 9 Using TurboCombi Nozzle and mini turine nozzle ......................10 Using accessory nozzles..........................
Failure to do so could result in electrical shock or personal cases, contact LG Electronics Service Agent to avoid hazard. injury. ¥ Do not continue to vacuum if any parts appear missing or damaged.
Page 6
If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified LG authorised Service Agent.
How to use Assembling vacumm cleaner Hose Handle Spring latch (Depending on model) Telescopic pipe Carpet and floor nozzle Telescopic pipe Push the nozzle into the telescopic pipe. • Push telescopic pipe firmly into hose handle • Grasp the spring latch to expand. •...
Page 8
Button Attachment Point Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operating vacuum cleaner Cord reel button Plug Control knob How to operate Park mode Storage • Pull out the power cord to the • To store during vacuuming, for • When you have switched off and desired length and plug into example to move a small plece of unplugged the vacuum cleaner, thesocket.
How to use Using carpet and floor nozzle Carpet Pedal Floor Carpet and floor nozzle (depend on model) • The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. Hard floor position (tiles, parquet floors...).
How to use Using TurboCombi Nozzle and mini turine nozzle Carpet Pedal Press Floor TurboCombi Nozzle Mini turbine nozzle Hard Floor Nozzle (depend on model) (optional) (depend on model) • The 2 position nozzle • Mini turbine is used for stairs •...
How to use Using accessory nozzles Upholstery nozzel (depending on model) Dusting brush (depending on model) Crevice tool Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle is for Dusting brush is for vacuuming Crevice tool is for vacuuming in vacuuming upholstery, picture frames, furniture frames, those normally hard to reachh mattresses etc.
How to use Emptying dust tank Tank handel Cleaning the dust “ tank”. Warning! • Open the tank cap. • Wash both parts with soft material. Gently rinse both parts separately under a cold Gently rinse both parts under a cold running tap. running tap until the water runs clear.
How to use Cleaning dust tank • Open cover with pushing button and pull out dust tank. Notice • Raise dust tank cap. • Dry fully in shade so that moisture is entirely removed. If suction power decreases after cleaning dust tank, clean air filter and motor safety filter.
If filters are damaged, do not use them. • Open the air filter cover by pulling the air filter cover lever and take out In this cases, contact LG Electronics Service air filter. Agent.
How to use Cleaning exhaust filter • The exhaust filter is areusable HEPA filter. • To change the exhaust filter, remove the filter cover on the body by release hook. • Pull out the exhaust filter. • Dust off filter. (Do not wash filter with water) •...
What to do if your vacuum cleaner does not work? Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working What to do when suction performance decreases? • Turn off the vacuum cleaner and unplug it. •...
Need help?
Do you have a question about the VC6818NR and is the answer not in the manual?
Questions and answers