Xoop Lighting EL100 User Manual & Datasheet page 8

mODE tO EmPLOy
mOuntIng
• For hanging installations use suitable fasteners (tailored to the weight) who can be fastened to one of the holes in
the bracket. Also always use a suitable safety rope.
please note the distance of at least 0,4m to flammable materials.
PLug In
Connect the plug into a socket which supplies a power and voltage capacity as written in the technical data.
When controlled with dMX please connect the device with a 3 pin XLR cable.
More devices can now be linked.
COntrOL
By using the display (A) and the four control buttons (B-E) you can set the dMX address and color mixing modes.
• For selection of the operating mode press the „Menu" button (B)
• For adjusting the dMX address or the color mixture, press the „Up" / „down" keys (C / d)
• Confirm the settings with the „Enter" (E) to save them
ImPOrtant
Settings are saved only and can be proceed after power loss automatically, if the settings are confirmed
through the „Enter" button.
8
(1)