Auto Standby; Powering On/Off - JVC TH-S320B User Manual

Volume value: the volume value is 00-32, and the factory set value is "10". It has last volume memory function.
Mode switching: BT/OP/HD/AU/US connection mode can be switched; meanwhile the selected mode will be
displayed on the display screen.

Auto Standby

1. The unit will automatically switch to standby mode when no audio input is received for 20 minutes.
The soundbar will wake up from standby mode when any button is pressed or source input is received.
2. If the TV or the external unit is disconnected, switch it off
• To switch the unit off completely, remove the adapter from the mains socket.
• Please turn the unit off completely to save energy when not in use.
3. The screen will be turned off for around 10 seconds without any operation, when pressing the buttons
on the sound bar or on remote control or the using iphone's volume increase or decrease, the display will
be waken up again.

Powering On/Off

5. Put adapter plug of the sound bar into a wall outlet, it will automatically enter standby mode.
6. Short-press the STANDBY button to turn on the sound bar.
7. To turn off, press the STANDBY button on remote control or unplug adapter from wall outlet.
Playing Audio via BT Connection
1.Turn on the sound bar and then short-press the STANDBY button on sound bar or POWER button on remote
control and switch the sound bar to Bluetooth mode and LED display "
bluetooth pairing mode with a double deep sound.
2. Turn on Bluetooth of your device, search for " TH-S320B " on your Bluetooth list, and then select Bluetooth
connection.
3. When successfully paired, you will hear a tone and the "
your phone or other compatible device that you selected can be played on the sound bar.
4. Use the volume buttons on the sound bar or on the remote controller to adjust the volume.
5. The remote controller includes Bluetooth mode playback controls. Press and hold PAIR button on the remote
controller more than two seconds to disconnect paired Bluetooth device or connect back last disconnected
Bluetooth device.
6. If you wish, you can change the audio settings by using the relevant buttons on the remote controller.
.
"on the screen stops flickering. Then the music on
9
" on the sound bar will flicker in the