Advertisement
Introduction
Thank you very much for deciding to purchase this quality product. To minimise the risk of injury, we
ask you to comply with a few basic safety precautions when using this product, Please read this oper-
ating manual thoroughly and ensure that you have understood it. Keep the operating manual for future
reference.
Safety Notes
1. Install the device in a protected area, so that nobody steps on the cable, falls over it and/or
damages it. Additionally, ensure that there is a sufficient ventilation via the surrounding air and
avoid heat accumulation.
2. To clean the device, use a wet cloth. Avoid the use of cleaning detergents and make sure that
no liquids enter the device.
3. The inside of the device has no parts needing to be maintained. The device must only be
maintained, adjusted and repaired by a qualified technician. In case of a foreign interference,
the warranty is voided! Keep the operating manual for future reference.
4. The oil extractor is not suitable for extracting solvents, petrol, alkalis or acids.
5. Pay attention to local regulations regarding waste oil disposal.
6. Avoid excessive contact with waste oil. A more frequent contact or contact over longer time
can lead to skin damages and diseases.
7. Always wear fitting safety equipment, such as protective gloves and safety clothing, whilst us-
ing the device.
8. Keep the extractor in a clean and maintained condition.
9. Always work with utmost care and attention.
10. Do not use excessive force on the device.
11. Never exceed the stated pressure data.
12. Dress accordingly for the work being carried out. Wear fitting protective clothes and avoid
wearing loose clothing and jewellery. Tie long hair together.
13. Place the device on an even, clean and dry surface. Additionally make sure that the surface is
able to carry the weight.
14. Ensure that all connections are sealed. If the connections are leaking, do not use the device.
15. Do not expose the device to rain or splash water.
Technical Data
Vacuum air pressure
Approved liquids
Pressure decrease time
Hose length
Air flow rate
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
8–10 bar
Motor oil and transmission oil
2 minutes
In and outlet each 2 m
200 l/min
Artikel 00000
Seite 3
11
2020-1
Advertisement
