Assembly Steps; Assembly Completion - modway Lippa Coffee Table Manual

CONNECTING TOP PANEL TO BASE
STEP :
1. Take out the hardware package from the carton of Base (2).
2. Adjust each four holes of the bottom of Top (1) and Base (2) to be matched ,then insert 1 piece Bolt
(A) with 1 piece Washer (B) into one of the matched holes of the bottom of Top (1) and Base (2) but
don't tighten fully at this step.Insert other 3pieces Bolt (A) with 3 piece WasherS (B) into matched
holes,pls also don't tighten fully.
3. Make sure all four pieces Bolts (A) with Washers (B) insert into holes and tighten all Bolts(A) by
using Allen Wrench(C) fully.
Customer Service 908-368-1025︱www.modway.com
Assembly is complete. Your Table is ready to enjoy now!
Page 2 of 2