Bagging The Clippings - Toro Super Bagger Operator's Manual

Figure 28
1. Top of mulch plug lever in switch channel

Bagging the Clippings

Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
WARNING
A worn grass bag could allow small stones
and other similar debris to be thrown at you
or bystanders, resulting in serious personal
injury or death.
Check the grass bag frequently. If it is
damaged, install a new Toro replacement bag.
If the side-discharge chute is on the machine, remove
it and lock the side-discharge deflector; refer to
Removing the Side-Discharge Chute (page 16)
bagging the clippings.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Shut off the engine and wait for all moving
parts to stop before leaving the operating
position.
Installing the Grass Bag
1. Remove the mulch plug
g005324
2. Route the starter rope around the lower-rope
guide (Figure
before
Note:
rope when you pull the recoil-start handle.
3. Insert the grass-bag handle into the grooves at
the top of the machine
Important:
that prevents you from starting the machine
unless you first install the grass bag securely
on the machine.
14
(Figure
Figure 29
30).
Figure 30
The lower rope guide releases the starter
(Figure
The machine has a safety switch
29).
g005309
g010267
31).