Using The Self-Propel Drive; Shutting Off The Engine; Engaging The Blade - Toro Super Bagger Operator's Manual

Figure 22
2. Turn the fuel valve lever to the O
(Figure 20).
Figure 23
3. Pull the recoil starter
Figure 24
Note:
If the machine still does not start, contact
an Authorized Service Dealer.

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you.
position
N
(Figure 24).

Shutting Off the Engine

Hold down the ignition switch in the S
the engine shuts off.
Important:
When you release the blade-control
bar, the engine should shut off and the blade
should stop within 3 seconds. If they do not, stop
using your machine immediately and contact an
Authorized Service Dealer.
g010266

Engaging the Blade

When you start the engine the blade does not turn.
You must engage the blade to mow.
1. Push the blade-control button and pull the
blade-control bar to the handle
g002896
2. Hold the blade-control bar against the handle
(Figure 26).
g010489
12
position until
TOP
(Figure
Figure 25
Figure 26
25).
g010491
g010492