Environmental Specifications; Ce Electrical Equipment Requirements; Fcc Regulations - Spectra-Physics Pulseo User Manual

CE Electrical Equipment Requirements

Environmental Specifications

FCC Regulations

For information regarding the equipment needed to provide the electrical
service listed under "Utility Requirements" in Chapter 6, please refer to
specification EN-309
Uses listed in the official Journal of the European Communities.
,"
The environmental conditions under which the laser system will function
are listed below:
Indoor use
Altitude:
Temperatures:
Maximum relative humidity: 85% non-condensing for temperatures up to
Mains supply voltage:
Insulation category:
Pollution degree:
This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
Modifications to the laser system not expressly approved by Spectra-Physics
could void your right to operate the equipment.
Environmental Specifications
Plug, Outlet and Socket Couplers for Industrial
, "
up to 3000 m
18° C to 35° C
31° C.
do not exceed ±10% of the nominal voltage
II
2
v