Omron RS7 Intelli IT New Product Information Sheet page 12

• DO NOT use this monitor for any purpose other than measuring blood pressure.
• During measurement, make sure that no mobile device or any other electrical
device that emits electromagnetic fields is within 30 cm of this monitor. This may
result in incorrect operation of the monitor and/or cause an inaccurate reading.
• DO NOT disassemble or attempt to repair this monitor or other components. This
may cause an inaccurate reading.
• DO NOT use in a location where there is moisture or a risk of water splashing this
monitor. This may damage this monitor.
• DO NOT use this monitor in a moving vehicle such as in a car.
• DO NOT drop or subject this monitor to strong shocks or vibrations.
• DO NOT use this monitor in places with high or low humidity or high or low
temperatures. Refer to chapter 9.
• Ensure this monitor is not impairing blood circulation by observing the wrist while
measurement is occurring.
• DO NOT use this monitor in high-use environments such as medical clinics or
physician offices.
• DO NOT use this monitor with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the monitor and/or cause an
inaccurate reading.
• Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for at
least 30 minutes before taking a measurement.
• Rest for at least 5 minutes before taking a measurement.
• Remove tight-fitting, thick clothing and any accessories from your wrist while taking
a measurement.
• Remain still and DO NOT talk while taking a measurement.
• ONLY use this monitor on persons whose wrist circumference is within the specified
range of the cuff.
• Ensure that this monitor has acclimated to room temperature before taking a
measurement. Taking a measurement after an extreme temperature change could
lead to an inaccurate reading. OMRON recommends waiting for approximately 2
hours for the monitor to warm up or cool down when the monitor is used in an
environment within the temperature specified as operating conditions after it is stored
either at the maximum or at the minimum storage temperature. For additional
information of operating and storage/transport temperature, refer to chapter 9.
• DO NOT crease the wrist cuff excessively.
• Read and follow the "Correct Disposal of This Product" in chapter 11 when
disposing of the device and any used accessories or optional parts.
• DO NOT use this monitor after the durable period has ended. Refer to chapter 9.
Data Transmission
• DO NOT replace batteries while your reading is being transferred to your smart
device. This may result in the incorrect operation of this monitor and failure to transfer
your blood pressure data.
Battery Handling and Usage
• DO NOT insert batteries with their polarities incorrectly aligned.
12
PM-1771-E-01-03/2018