Flx-20 Zoom - VEXILAR FL Series Owner's Manual

FLX-20 - Auto Zoom
THE LEFT HALF represents the zoom
view. From the bottom up to 6 or 12
feet. Read the distance from the
bottom using the large
white scale.
The Zoom scale reads in
the opposite direction as
the full view scale. The bottom
will always be at the 7 O'clock
position. Objects will appear above
this point. You can only see objects as far
off the bottom as the zoom setting permits,
either 6 feet or 12 feet. Objects above this level
will only appear on the right side which show the
entire water column.
IMPORTANT: Zoom should be activated only when the transducer is submerged. If the
zoom is activated before the transducer is placed in the water, such as when moving from
ice fishing hole to hole while the zoom is operating, the bottom may not line up with the
zero mark on the zoom scale correctly. If this happens, simply switch the flasher to Normal
Mode and then back to Zoom to reset the feature.
20
Flasher-Family-Manual-2019.indd 20-21
THE RIGHT HALF represents the entire
water column, from the transducer to the
bottom. Read the depth using the
inner white scale.
You interpret
the depth by
multiplying the
indicated value on
the white scale by
the multiplying factor
here.
10' Range = 10
Bottom
20' Range = x2
30' Range = x3
40' Range = x4
80' Range = x8
100' Range = x10
Fish
FLX-28 - Auto Zoom
THE LEFT HALF represents the zoom view
from the bottom up to 6 or 12 feet. Read
the distance from the bottom up using the
green depth markers.
The zoom scale reads in the
opposite direction as the full view
scale. The bottom will always be at the
7 o'clock position. Objects will appear above
this point. You can only see objects as far off the
bottom as the zoom setting permits, which is 6 or 12 feet.
Objects above this level will only appear on the right side,
which shows the entire water column.
Night Mode
FLX Series
Night Mode reduces
the flasher's display
brightness to make
night time viewing more
FLX Series To activate Night Mode or return the display to
comfortable to your eyes.
full brightness, press and hold on the top Gain control knob
The display intensity is
for three seconds.
reduced by about 50%.
THE RIGHT HALF represents the entire
water column from the transducer to the
bottom.
Bottom
Fish
21
5/15/19 12:27 PM