Crestron TS-1542-IMCW Installation Manual

TS-1542-IMCW
Interface Module for TS-1542
Installation Guide
Description
The TS-1542-IMCW is the interface module that is included with the TS-1542 HD Touch
Screen. It is also available separately to provide an additional plug-in connection point.
The touch screen connects to the interface module via a 8-pin RJ-45 connector.
The TS-1542-IMCW can be installed in a 1-gang electrical box, it can be rack mounted, or
it can be mounted on any at surface using the included mounting bracket.
Additional Resources
Visit the product page on the Crestron website (www.crestron.com)
for additional information and the latest rmware updates. Use a QR
reader application on your mobile device to scan the QR image.
Supplied Hardware
The hardware supplied with the TS-1542-IMCW is listed in the following table.
Supplied Hardware for the TS-1542-IMCW
DESCRIPTION
Bracket, Mounting
Insert, for TS-1542-IMCW
Insert, for TS-1542-IMCW
Screw, 6-32 x 3/16", Pan Head, Phillips
Screw, 6-32 x 1", Flat Head, Slot
Installation
Installing in a 1-Gang Box
To install the TS-1542-IMCW in a 1-gang box, mount the unit into the box, as shown in the
following illustration.
TS-1542-IMCW in a 1-Gang Box (Exploded View)
Mounting Surface
1-Gang Electrical Box
(Not Included)
TS-1542-IMCW
Screws (2) 6-32 x 1"
Wall Plate
with Hardware
(Not Included)
Insert
Rack Mounting
The TS-1542-IMCW can be mounted in a rack with other equipment using the four
mounting holes on the corners of the interface module, as shown in the illustration at the
top of the next column.
WARNING: To prevent bodily injury when mounting or servicing this unit in a rack,
observe the following guidelines:
• When mounting this unit in a partially lled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
COLOR PART NUMBER QTY
Black 2016054
Black 4522556
White 4522555
Black 2007203
Black 2013235
TS-1542-IMCW Rack Mount (Exploded View)
TS-1542-IMCW
Insert
Rack Mount Screws
(Not Included)
1
Installing on a Level Surface
1
To prepare the TS-1542-IMCW to be mounted onto a level surface, ensure the unit is
1
attached to the included mounting bracket, as shown in the following illustration.
2 TS-1542-IMCW Bracket Mount (Exploded View)
2
Mounting Bracket
Screws (2) 6-32 x 3/16"
Insert
Hardware Hookup
Make the necessary connections as called out in the following illustrations. Apply power
after all connections have been made. When making connections to the TS-1542-IMCW,
use Crestron power supplies for Crestron equipment.
Hardware Connections for the TS-1542-IMCW (Front)
TO PANEL:
Connect to TS-1542
via 8-Pin RJ-45 Cable
(Provided with TS-1542)
Rack Rail
TS-1542-IMCW