Operation - InVento 500880 Quick Manual

Operation

1. Extend the transmitter´s antenna for better signal
reception (fig. 3).
2. Place the Mini Shark gently into the water. In case
of contact with water, the 2 contact points (fig. 4) will
energize the Mini Shark. Keep the tail fin of the Mini
Shark clear of obstructions.
3. Transmitter Functions (fig. 5):
X X The function indicator lights up when any
button on the transmitter is pressed.
X X The Mini Shark runs forward when the
Forward button is pressed.
X X Pressing the Left/Right button on the
transmitter while the Mini Shark is running
forward, the fish will make left/right turns.
4. Take the Mini Stark out of the water after use and dry it with a clean cloth. The Mini Shark is now switched off and
the tail fin stops moving.
5. Caution: If the Mini Shark does not work properly, water might have penetrated the inside of the fish.
Loosen the 5 Phillips screws (fig. 6), carefully open the fish and dry it with a hair dryer.
Rescrew the fish again as last step.
(fig. 3)
Function
indicator
Forward
(fig. 6)
7
Contact points
(fig. 4)
Antenna
Left
Right
(fig. 5)