Installing A Power Supply In An Ex-Series Switch; Related Topics - Juniper EX Series Quick Start Manual

Related Topics

2
Removing a Power Supply from an EX-series Switch
Grasp the power supply handle and pull firmly to slide it halfway out of the
7.
chassis.
Place one hand under the power supply to support it and slide it completely out
8.
of the chassis. Take care not to touch power supply components, pins, leads, or
solder connections.
Place the power supply in the antistatic bag or on the antistatic mat placed on
9.
a flat, stable surface.
Figure 1: Removing a Power Supply from an EX 3200 or EX 4200 Switch
Locking lever

Installing a Power Supply in an EX-series Switch

Installing and Removing EX-series Switch Hardware Components
Power Supply in EX-series Switches
Field-Replaceable Units in EX-series Switches
AC Power, Connection, and Power Cord Specifications
EX 3200 Switch Rear-Panel Description
EX 4200 Switch Rear-Panel Description
Loosen captive screw.